Axial XR10 - Complete “no-compromise” competition ready kit. All new front and rear specific strong durable composite plastic, lightweight axles. Dual motors allow you to easily adjust your front and rear gear ratios independently.

XR10™ FEATURES/SPECS -

• Low profile axle housing design for maximum ground clearance.
• Front steering axle with the ability to rotate (clock) the motor up/down.
• Rear axle is 16mm narrower than the front axle to squeeze through tight gate layouts.
• All New Behind the Axle (BTA) Steering *pat. pend.
• Enclosed steering slide with turnbuckles to adjust toe in and toe out.
• 8° kingpin angle helps keep scrub radius to a minimum, which equals less stress on your steering servo.
• Durable composite plastic - strong double shear knuckle arms with replaceable aluminum draw link mount.
•  Splined adjustable c-hubs provide caster adjustments in 15° increments.

• 37.9:1 gear ratio using the included 14T pinion. Gearbox allows for use of 12-19T pinions for gear ratios ranging from 44.2:1 through 27.9:1. 
• Dual motors allow you to easily adjust your front and rear gear ratios independently.
•  Compact and lightweight gearboxes keep the motor positioned closer to the axle housing and above the axle centerline for extra clearance.
• Aluminum chassis plates with durable composite plastic skid plate.
• Chassis provides multiple upper link adjustment holes for suspension tuning and adjusting anti-squat.  
• Adjustable upper shock mounts included for fine tuning ride height and can be catered to your own personal driving style.
• Adjustable body mounts provide finite adjustments for different angles and heights.
• Removable electronics tray for easy maintenance and installation
• Waterproof receiver box with wire routing guides for cleaner electronic routing/configuration.
• Multiple ESC mounting plates and configurations
• Low profile battery mount places the weight of the battery at a lower position in the vehicle to help lower the center of gravity.
• Oversized rod ends with large 7mm aluminum links and durable composite plastic sleeves (replaceable).  
• Light durable composite plastic upper links also aid in lowering the center of gravity.  
• Full ball bearings (oversized differential bearings)
• Differentials: locked (spool)
• Wheels: New Axial 2.2 Competition Beadlocks
• Includes CNC orange anodized rings.
• Compatible with Vanquish patented wheel weight systems (Licensed by Vanquish Products)
• Minimal beadlock hardware for assembly ease
• Narrow offset to increase steering response and strength
• Suspension: 4-link, double triangulated
• 72-103mm shocks: includes aluminum bodies and 10mm machined Delrin pistons.
• Axial Hardline Body
• Competition inspired body – design, layout, and size all catered for optimum performance.  
• Meets all U.S.R.C.C.A minimum requirements
• Dove-tailed front and rear to minimize interference with tires.
• Rounded roof line and cab forward design to improve roll-over recovery.
  Part # AXI 90017

$299.99

AX90011 - AX10 SCORPION RTC
1/10, 4 Wheel Drive (4WD), Electric, R/C Rock Crawler.
Based upon the award winning AX10 Scorpion KIT*. The AX10 Scorpion RTC comes "Ready-to-Crawl". The RTC is currently the only 2.2 (most popular scale/class) rock crawler on the market that only requires batteries, and is ready to hit the terrain.

• Mount a standard stick pack to get up and running quickly, or use the included upper link plate to mount smaller batteries lower in the chassis for improved crawling performance
• 14T pinion paired with an 87T spur gear gives you a decent amount of wheel speed and great low-end torque.
• Hi-quality composite plastic and metals
• Hi-torque metal gear servo helps hold your line when rock crawling
• Solid rear axle lockouts improve ground clearance when crawling
• Aluminum chassis plates with a molded nylon skid plate provide a solid and rigid chassis
• Suspension: 3 Link
• Drive Shafts: universal front and rear with new and improved yokes
• Radio: 2 channel
• Servos: 1 Hi-torque metal gear (standard size)
• Overall stance has a lower center-of-gravity for better control and stability. Part # AXI90011

$269.99

Features:

• Wheelbase: 304mm~320mm (12”~12.6”)
• Width: 254mm (10”)
• Height: 156mm (6.125”)
• Weight: 1588g (3.5 lbs)
• Complete ready to race/crawl out of the box
• 4WD
• 27T Electric Motor
• 20T pinion paired with an 87T spur gear gives you a quick rock racer ratio, or install the included 14T pinion for a slower rock crawling ratio.
• True Beadlocks: No Messy Glue!
• Hi-quality Composite Plastic and Metals
• Durable (ESC) Electronic Speed Controller: Hi-quality durable forward and reverse speed controller.
• Hi-Torque Servo help hold your line when rock crawling
• Solid Rear Axle lockouts improve ground clearance when crawling
• Slipper Clutch: Reduces gear wobble for a more efficient drivetrain. Allows a motor to work more efficiently and greatly enhances the durability of the drivetrain.
• Aluminum Chassis plates with a molded nylon skid plate provide a solid and rigid chassis
• Ultra compact and lightweight transmission
• Open front diff for smaller turning radius, or install the included front locker for more traction when rock climbing!
• Rear axle is locked for better traction.
• Full Ball bearings
• Overall gear ratio range from 15:1 to 74:1
• Transmission: 2.6:1; center mounted
• Differentials: Front - gear differential; Rear - locked (spool)
• Transmission: Single-speed
• Tires: Axial 2.2 Rock Lizards
• Wheels: Axial 2.2 8 Hole Beadlocks (Satin Chrome)
• Suspension: 3 Link
• Drive Shafts: Universal front and rear Part # AXI90002
  

$249.99

Low Low Price!

Axial SCX10 Crawler / Trail Rig

The backbone: rigid steel C-channel frame
• Torsional stiffness: realistic looking frame and cross braces improves chassis rigidity
• Tapered frame: for increased articulation and added realism
• Simplified design: for easy and quick maintenance and assembly
• Contoured skidplate: significantly reduces hang-ups on terrain
• Shock hoops: allow for multiple shock positions
for tuneable performance.
Proven durability: The axles have been designed with many features that are not available from other products on the market. Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration when designing these axles. The result is a far superior axle that will stand-up to some severe punishment. To ensure added longevity from the start a hi-tolerance sintered diff locker is included along with hardened axle shafts. Part # AXI90007

$239.99

Low Low Price!

• Complete competition ready kit
• Axles that feature an improved driveshaft angle and castor as well as class leading steering throw
• Aluminum Chassis plates with a molded nylon skid plate
• Ultra compact and lightweight transmission
• Full time locked four wheel drive
• Full Ball bearings
• Overall gear ratio range from 15:1 to 74:1
• Transmission: 2.6:1; center mounted
• Differentials: Locked style (spool)
• Transmission: Single-speed
• Tires: Pro-Line M2 Hammer™
• Wheels: Axial 2.2 8 Hole Beadlocks
• Suspension: 3 Link
• Drive Shafts: Universal front and rear

Chassis Wheelbase: 304mm~320mm (12”~12.6”) , Width: 254mm (10”) , Height: 156mm (6.125”) , Weight: 1588g (3.5 lbs) , Articulation: 70° , Ground Clearance: 79mm (3.125”)

$249.99

SCX10™ KIT W/TRAIL HONCHO™ BODY - The latest AXIAL SCX10™ is inspired by off-road vehicles that are basically part truck and part buggy, nicknamed "truggies". The new Axial SCX10™ is the kit to have when it comes to having a realistic looking truggy. Scale features such as the steel c-channel ladder frame, plastic molded cage, and plastic front bumper with aluminum skid plates are included in this kit. These are just a few of the features that set this kit apart. KIT: Complete Assembly Required, 1/10th Scale | Electric | 4X4 Truck

Part # AXI90014

$259.99

Axial SCX10™ w/Dingo Body™ - TR (Trail Ready™) RTR
Get ready to hit the trails now with the new SCX10™ TR (Trail Ready™). The TR™ features a true steel C-channel ladder frame with bolt on shock hoops, molded skid plate, and dual spring oil filled shocks. These are just a few of the items that make this one capable off-road truck. The Dingo™ truck body is also specifically designed for the trail because it incorporates a realistic molded roll cage and fender flares which are molded in tough durable composite plastics that will withstand the abuse of some of the toughest trail runs. Also when the sun sets, the outings don't stop either because a total of 6 LED's brightly illuminate the trail, so there's no trail too treacherous for the SCX10™ TR. Includes a 2 channel radio system and ESC.

Part # AXI90012

$299.99

SCX10™ Ready to Run W/TRAIL HONCHO™ BODY - The latest AXIAL SCX10™ is inspired by off-road vehicles that are basically part truck and part buggy, nicknamed "truggies". The new Axial SCX10™ is the kit to have when it comes to having a realistic looking truggy. Scale features such as the steel c-channel ladder frame, plastic molded cage, and plastic front bumper with aluminum skid plates are included in this kit. These are just a few of the features that set this kit apart. WHAT IS TRAIL READY?™ Exactly what it sounds like. This rig is designed to take-on some of the toughest terrain on or off the trail because it comes fully equipped with all the neccessary hardware. All you need are batteries and you’re ready to attack the trails or blaze your own. AM 2 channel pistol grip radio.
• Servo reversing switches for steering and throttle.
• Trim dials for fine tuning steering and throttle centers
• Your choice of 4 different frequencies allows you to do trail runs with your friends.
• Battery indicator light lets you know when your transmitter batteries run low.• Forward and reverse speed controller.

Part # AXI90016

$299.99

• Motor & Battery Placement Is Key - The placement of the motor and battery gives you low center of gravity position to give you optimal balance.
• TVC Chassis - Twin Vertical Chassis design makes for a supper high rigidity chassis designed specifically to clear any space that is required.
• Super Compact - Front and rear gearboxes are supper compact thanks to New Kyosho Worm Gear Technology, this translates to better ground clearance.
• Worm Gears - Worm gear gives you the benefit of a lower gear ration and added strength by hardened steel gears.
• No Special ESC - By using the worm gears in the Rock Force�s diffs that eliminates the need for a special ESC. You can buy a standard Perfex ESC and go compete and don�t worry about being docked points for sliding backwards because that problem was eliminated completely.
• Standard - The Rock Force is user friendly and is meant to be use with standard radio equipment. No need to buy a special ESC or transmitter.
• 4WDS - 4 Wheel Drive Steering allows front steering and rear steering simultaneously or individually. *Cannot be combined with rear drive disconnect functions or rear drive lockout functions.
• Dig System - The dig system in the Rock Force is activated by and optional linkage system, this system comes in handy during those tight turn scenarios
• Telescopic Center Drive Shafts - Center telescopic drive shafts extends out on both ends for maximum angle.
• Suzuki Jimny - The Classic Suzuki Jimny Rock Crawler body is included with the Rock Force Kit.
• Wheels - The rock force will come with industry standard 2.2 wheels so there will be no shortage of cool Rock Force after market components
  Part # KYO30984

$399.99

Features:

• The front and rear solid axle features a worm gear drive that acts as a brake when no power is supplied
• The included ESC, with crawler-specific programming, accepts NiMH and LiPo batteries
• All-metal CV front axle and center driveshafts provide superior durability to the driveline to handle the stresses of rock crawling
• The included Losi radio system with Spektrum 2.4GHz DSM technology means you’ll never have to worry about radio interference
• The included front and rear LED light set comes pre-wired and mounted to the chassis
• 4" adjustable aluminum shocks provide durable, smooth operation and maximum suspension articulation without binding
• The crawler features a low-center-of-gravity battery tray design that allows for multiple battery types—from NiMH and LiPo “stick” packs to any of the 2.2-inch Losi LiPo crawler battery packs
• The molded 4-link suspension setup minimizes rear axle swing and provides more precise handling
• True 3-piece 2.2 beadlock chrome wheels, with 12mm hexes, hold the tire bead in place and let you change tires if needed—all without glue
• National Champion 2.2 Losi Rock Claw tires with foam inserts are constructed with Losi’s blue compound and have the characteristics, grip and traction to scale even the toughest courses
• The direct-drive transmission provides an ultra-low gear ratio for rock crawling and metal outputs for durability
• The twin vertical plate chassis is anodized blue for a custom look
• Zero Ackerman steering provides class leading performance with 45 degrees of steering throw
• The competition-legal Grappler Pro body features realistic looks and added functionality. Part # LOSB0104

$299.99

• COMPACT FRONT & REAR LOCKING (DIG) CENTER TRANSMISSION ALLOWS THE CRAWLER TO OVERTAKE OBSTACLES WITH EASE
• FRONT AND REAR SOLID AXLE WITH WORM GEAR DRIVE
• FRONT AND REAR LOCKED DIFFERENTIAL PROVIDES FULL TIME 4WD
• 4-LINK SUSPENSION MINIMIZES REAR AXLE SWING,ALLOWING FOR MORE PRECISE HANDLING
• 3-PIECE 2.2" BEAD LOCK WHEELS WITH ALUMINUM OUTER RINGS
• 2.2 LOSI ROCK CLAWS TIRES WITH FOAM INSERTS
• 4" ALUMINUM THREADED SHOCKS WITH TITANIUM NITRIDE (TiNi) SHAFTS ALLOW THE SUSPENSION TO ARTICULATE WITHOUT ANY BINDS
• DURABLE CV FRONT AXLE SHAFTS ALLOW FOR INCREASED STEERING RANGE
• TWIN VERTICAL PLATE CHASSIS WITH ADJUSTABLE SHOCK MOUNTS
• ZERO ACKERMAN STEERING PROVIDES CLASS LEADING PERFORMANCE WITH 45 DEGREES OF STEERING THROW
• ALUMINUM UPPER AND LOWER SUSPENSION LINKS FOR ADDED STRENGTH
• RACE ROLLER CHASSIS IS PREASSEMBLED; SIMPLY
  ADD ELECTRONICS, PAINT AND GO Part # LOSA0051

$269.99

1. Integrated DSM receiver/ESC combo
2. Metal worm gears (eliminate the need for a special ESC)
3. 4-link suspension
4. Low-profile solid axle housings
5. Molded telescoping driveshafts
6. Micro transmission designed for low motor mounting
7. Molded skid plate for transmission
8. 3-wire micro crawling servo
9. Powerful micro motor
10. Chrome beadlock-style wheels
11. Realistic soft-compound micro Rock Claw™ tires
12. Twin vertical plate (TVP) aluminum chassis design
13. NiMH battery and charger
14. Fully decorated micro tuber-style body
    
    Part # LOSB0236

$149.99

Losi’s Mini-Rock Crawler utilizes design elements from real-world rock crawling competitors. Features:

• Metal Twin Vertical Plate (TVP) chassis design
• Multi-link crawler suspension design
• Heavy duty metal ring and pinion gears, axles and axle shafts
• Gusseted drive cases for increased strength and durability
• A true locked-out rear end design, no steering spindles
• Heavy duty universals with slide-type outdrives and metal yolks
• Alloy lower suspension links with captured ends
• Extra long oil-filled shocks, front and rear
• Solid axles with optimized drive shaft angles allow for a freely-rotating driveline throughout the entire suspension travel
• Telescoping slider driveshafts
• 3-Gear center transmission with spool and slipper
• 4WD with locked differentials
• Ball bearings throughout
• 1.9" Beadlock-style wheels with 12mm wheel hexes
• New electronic FWD/RWD rock crawling specific speed controller (ESC) with extra drag brake
• High-torque rock crawler specific motor
• Mini high-torque rock crawling servo
• Tuber style body: scale looks of the full-scale rock crawling machines; 3 colors to choose from: red, blue and black
• Features Mini-Rock Claw tires for superior traction (modeled after the National Champion winning 1/10-scale Rock Claw 2.2 tires)
• Losi LSR3000 radio system featuring Spektrum™ 2.4GHz DSM® technology for crystal-free operation
• 7.2V 1100mAh NiMH battery and charger
• 4 AA batteries included for transmitter
  Part # LOSB0222 -

$229.99

HPI makes getting right into crawling simple and fun with the excellent Crawler King - Jeep Wrangler Rubicon ready to run truck kit! With its tall Rock Grabber tires, heavy beadlock wheels, super-narrow chassis, front-mounted battery and motor, full-time 4WD and locked gearboxes, you will be be king of the mountain.

Features List

• Fully assembled crawler truck kit
• Ready to Run with your choice of 2 bodyshells, pre-built chassis, assembled tires and installed electronics
• Available with Land Rover Defender 90 or Jeep Wrangler Rubicon pre-painted & pre-cut bodyshells with decals applied
• Full-time 4WD with sealed drivetrain
• Long wheelbase chassis for sure-footed stability
• Over 15cm (6 inches) of articulation to get over any obstacle
• HPI Crawler 55T high-torque crawler-specific motor
• HPI EN-1 reversible electronic speed controller
• HPI TF-1 steering wheel radio system with SF-1 steering servo
• HPI Rock Grabber crawling tires
• HPI Rock 8 2.2 inch beadlock wheels with stainless steel rings
• Front-mounted battery for best weight distribution
• Slider driveshafts for secure power transfer
• Multiple lower shock and link mounts for competition tuning
• Savage body mounts to fit huge variety of Savage and monster truck bodyshells
• Easily upgradeable electronics
• Battery pack, charger and 8 AA batteries for transmitter not included.
  Part # HPI102115 - Jeep Wrangler Rubicon VERSION

$264.99

$209.99

INCLUDES: PTI Goliath Rock Crawler kit with oil-filled shocks,
clear body, 2.2" tires, foam tire inserts, wheels,
-- tooth pinion gear, -- tooth spur gear, ball bearings, and
photo-illustrated manual
_
REQUIRES: Radio: 2-Channel with 1 servo (standard size)
Radio Batteries: (8) AA size
Speed Control: Electronic of modelers choice
Motor: 540/550 size
Battery: 5 cell
Charger: AC/DC timed or peak for 5-cell battery
Paint: Polycarbonate safe
Misc. Items: Building and track equipment Part # PTI 2200

$199.99

• This is a 1/10 scale R/C assembly kit model of the Ford Bronco 1973.
• Comes on the excellent CR-01 crawling chassis.
• The newly designed polycarbonate body captures the Bronco's classic form.
• Newly designed metal plated H parts (Grille, side mirrors, and light covers) are made of durable ABS resin.
• The Bronco comes equipped with CR-01 Cliff Crawler Tires (Item 54117).
• Type 540 motor included.-ESC, 2-channel R/C system, battery pack & charger are separately required.
• A wide range of Hop Up parts are available for you to further customize your machine.
  Requires: (unless stated differently above)
  • Radio: 2-Channel with servo(s)
  • Battery: 6-cell flat with standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Paint: PS for Polycarbonate/TS for ABS
  • Misc. Items: Building and track equipment
  • Part # TAM58436

$379.99

• The Jeep Wrangler's body is accurately reproduced with an injection-molded plastic shell.
• Beadlock tires, planetary gears, and the universal shaft come conveniently pre-assembled
• CR-01 features a heavy duty ladder frame with strong lightweight pressed aluminum channels and cross channels.
• 4 link coil system provides the flexibility needed to conquer difficult rocky terrain.
• Beadlock wheels mounted with massive rock crawling tires ready for any terrain.
• Motor included.
• 2 channel controller, battery and charger not included.
• A wide variety of Option Parts are separately available to customize your machine.
  Requires:
  • Radio: 2-Channel with servo(s)
  • Battery: 6-cell flat with standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Paint: PS for Polycarbonate/TS for ABS
  • Misc. Items: Building and track equipment
    Part # TAM58429

$399.99

Tamiya Land Cruiser - R/C fans have long been modifying their machines into rock crawlers. Tamiya has followed this growing segment with interest and we are now proud to present to you the fruits of our research. This new crawler features a true-to-scale Toyota Land Cruiser 40 body made from lightweight polycarbonate mounted on an all-new CR-01 chassis and is literally ready to rock.CR-01 dedicated crawler chassis features heavy-duty ladder frame with strong yet lightweight pressed aluminum channels and resin cross members. The space saved by mounting a compact planetary gearbox enables the battery to be located lower on the chassis for optimum center of gravity. Kit

• Radio: 2-Channel with servo(s)
• Battery: 6-cell flat with standard Tamiya connector
• Charger: AC/DC timed or peak for 6-cell battery
• Paint: PS for Polycarbonate/TS for ABS
• Misc. Items: Building and track equipment

Part # TAM58405

$299.99

$349.99

Tamiya High-Lift Ford 350 Truck -This electric R/C assembly kit is one of the most representative American pick-up trucks, the Ford F-350. The model features realistic ladder frame, 3-speed transmission and shaft drive 4WD system. Highly detailed injection molded body and large diameter wheels enhance the stylish high-ground-clearance look. Original marking stickers add to the truck's overall realism.

This is the truck everyone has been waiting for! Tamiya has brought back the technology that made the original Bruiser popular and combined it with new technology and then added a Ford 350 body to create this unique truck.

REQUIRED ITEMS (NOT INCLUDED), BATTERY (7.2 volt), RADIO CONTROL UNIT TRANSMITTER, RECEIVER, ELECTRONIC SPEED CONTROLLER (ESC), STEERING SERVO & SHIFT SERVO
Part # TAM58372

$399.99

NEW! Tamiya Toyota Hilux High Lift - 4x4- 3SPD - Combining nostalgic feel with modern mechanics, the superbly detailed classic Toyota pick-up truck body is now mounted on the same chassis as the Ford F-350 High-Lift. About the Model

• Durable ladder frame chassis features steel channel and resin crossmembers for high strength.
• Adjustable front and rear leaf spring suspension system equipped with friction dampers.
• 3-speed transmission allows gear changing and realistic low-speed driving.
• Propeller shafts and slipper clutch efficiently transfer power to all wheels on any type of terrain.
• Differential may be easily locked in place to enable improved off-road performance.
• Highly-detailed injection-molded body complete with new parts for rear bumper, muffler, side steps, side mirrors, and wipers, accurately reproduces the classic pick-up truck.
• Manufacturer logos depicted with metal transfer stickers, and various metal plated parts accentuate the truck's body.
• Quick-access battery compartment enables easy battery changes without removing body.
• Includes type 540 motor.
• 4-channel transmitter, ESC, and running battery & charger are all separately required.
• Installing the separately available Pick-Up Truck Multi-Function Unit MFC-02 (ITEM 53957) will further enhance the truck and put a wide range of realistic light, sound, and vibration effects at your fingertips.
  Requires: (unless stated differently above)
  • Radio: 2-Channel with servo(s)
  • Battery: 6-cell flat with standard Tamiya connector
  • Charger: AC/DC timed or peak for 6-cell battery
  • Paint: PS for Polycarbonate/TS for ABS
  • Misc. Items: Building and track equipment
    Part # TAM58397

$399.99

FEATURES: Chassis: Ladder type 6mm thick machined aluminum. Drive: Four wheel shaft driven. Motor: Two Mabuchi 540s. Ball bearings: included, bushings are also included throughout kit Shocks: Oil-filled, high volume coil over with cantilever push rod design. This feature allows the shocks to provide long travel to enable the axles to clear the most extreme angles. Gearbox: One closed center gearbox with additional bracing that acts
as a heat sink and an integral stress member for the chassis. Differentials: planetary gear. Transmission: single-speed. Tires: Split V treaded rubber 4.2" x 6.5" (106mm x 165mm). Wheels: Chrome finished plastic, one piece 2.6" x 3.7" (66mm x 94mm). Speed Control: Mechanical, three speed forward, one speed reverse.
Bumpers: Front and rear nylon reinforced. Suspension: Four link solid axle, adjustable. Suspension links are
made of high quality aluminum tubing with plastic ball cup ends for fully articulated movement. Front and rear stabilizer bars reduce chassis roll. Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the chassis. Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle. Steering: Dual tie rod system. Four wheel steering is available by installing 2 way connector and high torque servo (must purchase separately). Body: Pre-painted and trimmed. Most of hood is Yellow changing to a deep Blue over the rest of the vehicle with a White lightning bolt pattern on the top and sides. A spare untrimmed transparent body
is also included for the modeler who wants to create his own paint scheme. Both bodies are extended cab pickup truck style. Servo Saver: included, high torque. Part # TAM58280

$399.99

$219.99

• Innovative T-Lock™ remote locking differentials let you select front and rear locked diffs, front locked diff, or full open differentials via the transmitter
• Transmitter-operated High-Low transmission switches from a 70:1 first gear ratio for climbing torque to a 25:1 second gear ratio for trail speed
• 10-LED lighting system opens the door to night-driving fun
• ExoCage™ body adds real-rock-rig style and functional protection
• New 3.8" Geode™ wheels with bead lock-style sidewall protectors mount securely to aluminum 17mm hex hubs
• Massive 7" Canyon AT™ extreme-terrain tires with soft inserts generate awesome off-road grip.
• Also includes (2) 7 cell batteries!
• Part # TRA5607

$549.99

ESP RokZilla is the result of ESP Hobby Mfg's. 18 years of experience in manufacturing chassis conversion kits for the ClodBuster. We realized that Rock Crawling is the hottest new segment of the market and decided to dedicate a kit exclusively for the task. Come on inside and experience the coolest Rock Crawler you have ever seen!
Rokzilla has incredible steering control and a unique method of mounting it's servo to the gearbox.10" of independent suspension action! This is a result of a unique mounting system that allows the 7" long coil over shocks to pivot freely as the axles move through their paces. This is truly an amazing feat for a truck that does not use cantilevers to increase it's travel. We wanted a very realistic, scale appearance for RokZilla and using cantilevers just wouldn't be right. How about those extra long shocks and all of that crazy articulation. Rokzilla features a revolutionary single pivot double triangle suspension design that closely replicates that of a real crock crawler. There are new lower shock mounts that attach the shocks to the a point that is actually beneath the axle line allowing such extra long shocks to be fitted. The best thing about Rokzilla is that it's not just a great crawler, it handles too! With it's very stable suspension platform and 3.00" of vertical wheel travel, it handles and jumps similar to that of a stadium truck...without the use of sway bars! 
Part # ESP500

$259.99

ESP - CLODZILLA IV  PRO FULL RACE KIT - This is truly the the state of the art in conversion kits for the ClodBusters and Bullheads. It is the lightest kit that we offer at only 8lbs.,with over 4" of ground clearance and a whopping 10" of wheel independent travel.It includes seven individual products in one box for everything that you will need (except oil shocks & electrics) to complete the ultimate racer or backyard bashin' monster!!

This is the same truck used by the top real monster truck teams
as well as R/C racers around the country. If your really serious about building the ultimate monster, then this is the kit for you.

Includes: CLODZILLA IV Racing Chassis, CLODZILLA Long Wheelbase Multi-link Kit, Heavy Duty Steering Rods With Rod Ends, Ball Bearing Canitlever Kit, Anti-Sway Bar Kit Dual Servo Mounting Kit, Low Profile Aluminum Body Mounts Part # ESP048

$219.99

ESP - CLODZILLA II SPORT KIT - This is the original CLODZILLA conversion kit for the ClodBuster and Bullhead R/C monster trucks. It is this
kit that truly took the R/C world by storm when it was introduced back in 1990. Now you could take the otherwise ho-hum Clod kit and really turn it into something way-cool !! Several thousand of these kits have been sold all over the world and they still keep selling today.The reason is that the CLODZILLA II is such a versatile truck because it will accept all of the stock Tamiya parts; stock body, mechanical speed control, shocks, etc or can easily be upgraded to our high performance parts as your budget allows.
Includes:CLODZILLA II Ladder Frame Chassis, CLODZILLA Long Wheelbase Multi-Link Kit, Heavy Duty Steering Rods, Suspension Lift Kit, Aluminum Hi-Lift Body Mounts Part # ESP034

$159.99

ESP - CLODZILLA III INTERMEDIATE RACE KIT-For those of you who want less weight in your monster truck & more suspension travel without having to spend alot, this kit is for you! It features a much smaller and lighter chassis than our ESP CLODZILLA II but is extremely durable as well. Even though it is an entry level kit, alot of people still race these because of the fact that it sits very low to the ground and corners extremely well.

Includes: CLODZILLA III Ladder Frame Chassis , CLODZILLA Long Wheelbase Multi-Link Kit, Heavy Duty Steering Rods With Rod Ends, Low Profile Aluminum Body Mounts Part # ESP044

$189.99

FEATURES: Chassis: Drive: Four wheel shaft with steel drive joints and steel/plastic composite drive shafts Differential: Tru-Lok locking design with external manual locking sliders, hardened steel bevel and spider gears, optional Remote Locker upgrade kit available Shocks: Four threaded composite body with internal anti-roll springs Gearbox: Sealed, constructed of glass filled nylon with silicone access cover for easy maintenance, five heavy duty glass filled nylon gears and ten ball bearings Tires: Ridgeline tread pattern with aggressive sidewall lugs for high degree of grip and superior side hill driving 127 x 55mm competition legal size, memory foam inserts Wheels: Beadlox 2.2" (56mm) with aluminum lock ring, full size design features an elliptical tire bead that is "captured and locked" in a channel between the wheel and aluminum lock ring Suspension: Tru Triangulated four link design with bent lower links for added ground and obstacle clearance, over 70° of unlimited bind free articulation with anti roll springs removed Body: Die-cut clear polycarbonate with window masks and decals Steering: 40° of deflection.

REQUIRES: Radio: 2-channel with standard size servo and receiver (no need for micro components) Battery: 6-7 cell NiMH or 2S LiPo battery pack Battery Charger: Compatible with selected battery Motor: Crawler type brushed or brushless ESC: Compatible with selected motor Building and track equipment
Part # VEN8300GR GREEN VERSION

$189.99

$31.99

$31.99

HPI Racing is proud to announce our newest addition to our highly detailed line of bodies, the Land Rover Defender! This uniquely British styled truck has been the world’s standard in all terrain adventure for decades. Introduced in the early 90’s Land Rover has sold the Defender all over the world and has even adapted it to military use! With a tough and versatile pedigree like this we just couldn’t resist making a version of our own and now you to can have this body for your monster truck! If you like the styling of our Ford Bronco or Jeep Wrangler bodies but are looking for a bit of European flair this body is for you.

Included with the body is a large pre-cut decal sheet includes window lines, headlights, grilles, tail lights, official Land Rover and Defender logos and much more, providing Savage owners with a realistic finished product. An overspray film is included, as well as vinyl window masks to make painting quick and simple. An instruction sheet is included for the decals, and the body has dimple marks for body post drill locations for blank bodies. This body will fit all Savage, and most competing monster trucks.

• Photorealistic die-cut premium vinyl decals include window frames, headlight, grille, tail lights and more, plus official logos!
• Overspray film and pre-cut vinyl window masks make painting fast and simple
• A decal instruction sheet is included for decal placement
• The body has dimple marks for body post drill locations
• Molded from 0.040" clear polycarbonate plastic for durability and long life
• This is an officially licensed replica. Part # HPI7199

$30.99

Volkswagen® Baja Bug Body T/E/3.3-MAXX® (long chassis models only), REVO® 3.3, and LST

The Baja Bug is back with the same style, quality, and features as it had the first time around and is now officially licensed by Volkswagen®.

Features:

• Classic VW bug styling with Baja flair
• Simulated rear engine detail just like the stock motor
• Made from durable/genuine .060 Lexan®
• Decal sheet included
• Window mask included
• Paint-then-peel overspray film included
• Backed with Pro-Line quality

When you’re looking to outfit your Monster Truck with the coolest, most durable, long-lasting body shells, then check out Pro-Line complete line of bodies including the Volkswagen® Baja Bug.

NOTE: Does not include rear Lexan® wing. Will not fit on E-REVO® or Savage XL Part # PRO3238-00

$32.99

Volkswagen Baja Bug Body T/E/2.5-MAXX® (short chassis models only), REVO® 2.5, Savage, TNX, and Flux

The Baja Bug is back with the same style, quality, and features as it had the first time around and is now officially licensed by Volkswagen®.

Features:

• Classic VW bug styling with Baja flair
• Simulated rear engine detail just like the stock motor
• Rear spoiler and hardware included
• Made from durable/genuine .060 Lexan®
• Decal sheet included
• Window mask included
• Paint-then-peel overspray film included
• Backed with Pro-Line quality

When you’re looking to outfit your Monster Truck with the coolest, most durable, long-lasting body shells, then check out Pro-Line complete line of bodies including the Volkswagen® Baja Bug Part # PRO3238-61

$29.99

Proline - Chevy® Blazer™. Rugged, tough, and soon to be classic styling are now available from Pro-Line for T/E/2.5-MAXX®, REVO® 2.5, & Savage trucks and various rock crawling chassis.

The Blazer™ is one of the first SUV’s that made a successful entry into the automotive industry. It’s squared-off, straight-forward design give it a classic automotive look while holding true to that off-road look. The perfect body to replicate the one you had or the one always wanted to have.

Made from super strong lexan material, the Chevy® Blazer™ is ready for off-roading in a dirt field near you.

* Extended Rear Body Post required Part # PRO3244

$28.99

$28.99

$28.99

$29.99

$22.99

Losi - 10 Grappler 2.2 Rock Crawler Body, Clear

• USRCCA legal for all 1/10 scale rock crawling classes.
• Made from crystal clear 040" Polycarbonate.
• Includes a 5 color decal sheet and precut window masks.
• Fits the popular rock crawling vehicles: Axial AX-10 Scorpion, Bender SW2 & SW3, Gatekeepers Design GC1 and Reign K2-3L.
• Requires painting and trimming Part # LOSA8032

$21.99

$21.99

$21.99

$18.99

$25.99

Futaba 3PM-MX 3-Channel 2.4GHz Computer Radio

The 3PM you've wanted! One radio for racing, crushing, crawling, bashing and boating!
There's no need to buy separate systems for every application. The 3PM-X handles them all for a single, affordable price and gives you FASST 2.4GHz dependability as a bonus. It offers all the conveniences and features of the original 3PM, plus these new performance and programming pluses! Transmitter and Receiver - NO servos

FUTK2021

$189.99

$299.99

Spektrum DX3S: 2.4GHz with Integrated Telemetry Radio System

Combining Spektrum's industry-leading 2.4GHz DSM® technology with valuable telemetry features. The DX3S represents the most advanced sport-level DSM radio ever developed. RTR drivers and sport racers can add the safety of telemetry and monitor vital vehicle stats right all right from the large LCD readout of the DX3S.

$249.99

$169.99

$129.99

$99.99

$129.99

Because crawler vehicles require such precise movement control at low speeds, it only makes sense to use equipment specifically designed for this purpose. Novak is one of the few, if not the only R/C manufacturer, who offers a speed control specifically designed for crawlers. So if crawling is what you like to do, you’ll want to take a good look at Novak’s Rooster Crawler-Edition.

Besides a different case label, the Rooster Crawler looks the same as the Rooster 12T. Same small footprint, same heat sink assembly, and same 14-gauge power wires on PCB-direct solder tabs for easy soldering. Inside the orange case, however, is where crawler-specific software transforms the Rooster into a Crawler. The special software enables crawler applications to scale, navigate, and conquer the most challenging terrain.

The Rooster Crawler is equipped with an improved 6 volt/ 5 amp BEC that’s perfect for super high-torque servos in crawling conditions. Its Zero Reverse Delay allows instant power delivery in both forward and reverse when needed. High-power Drag Brakes provide monster holding power that’s especially useful when embarking on a downhill descent. And yes, the Rooster Crawler edition includes the newest must-have feature: built-in Li-Po cut-off protection. This feature monitors the vehicle’s Lithium Polymer battery pack’s voltage, and prevents the batteries from going below the critical safety voltage level. The driver is cued via throttle blips when the voltage drops to a certain level. After 20 blips it then shuts off, however, full control of the steering servo is left intact. The Li-Po cut-off protection feature can be enabled or disabled via the ESC’s two throttle profiles. Part # NOV1841

$89.99

Novak Goat Crawler Brushless System. As the R/C crawling segment gains popularity, the need for crawler-specific equipment has become greater. Novak is happy to fill the need with the Goat Crawler Brushless System (#3019),

Part # NOV3019

$169.99

Compare Futaba's new MC230CR to a mechanical control, and you'll quickly realize: there is no comparison. 20T motor or higher limit.

Instead of the notchy, all-or-none response of a mechanical control, there's a smooth transition from one speed to the next, in forward and reverse. Setup requires pressing a single button, rather than repeated attempts to get things just right. In place of the combined weight of a mechanical control and the servo that controls it, there's the lighter weight (and greater versatility) of SMT (Surface Mount Technology) Components. And instead of having to invest in separate controls for sport driving and racing, there's a single control that does both. Part # FUTMC230CR

$49.99

Duratrax Intellispeed Auto Sport with Reverse - Perfect for stock motors with no fewer than 18 turns! Features fully proportional forward and REVERSE, in addition to ABS braking! Part # DTXM1059

$39.99

LRP Ai Super Reverse - First there were "Two-Button" setup speed controls ... Then came "Single-Button" setup ... Now, LRP introduces the new A.i. Series of fully AUTOMATIC digital speed controls. There are NO buttons to push, NO special setup sequences to run. Just plug them in and GO!

A.i. features:
14T or higher motor limit
Intelligent automatic setup
Forward/Brake/Reverse operation
Fail-Safe function
Integral Heatsink
Reverse Polarity, Overload, and Thermal protection
Motor and battery connectors already installed ... no soldering needed!
Part # ASCLRP83200

$59.99

$42.99

$49.99

Monster truck owners in need of the greatest steering power possible will love the Z9100T Ultra Torque servo.  With the same case size as the 9000 series, it's an easy upgrade, and the red anodized aluminum heat sink case keeps things cool in demanding conditions. Standard case - 370 oz/inch torque
Key Features

• Extreme torque perfect for large vehicles
• Fast transit time assures responsive feel
• Metal mid case for heat dissipation
• High frequency digital electronics for greater power, reliability
• Customized electronics specifically for surface use
• Metal gears for reliability
  Part # JRPSZ9100T

$129.99

$59.99

$35.99

$19.99

$19.99

$19.99

$19.99

$19.99

$19.99

$33.99

$28.19

$32.69

Pro-Line Hammer 2.2 Tires - For the Rock Crawler - The Sledgehammer and Jackhammer trails located near Johnson Valley, California, are some of the most brutal trails known to crawlers around the country. Twisted fenders, crushed rocker panels, axle breaks, are all apart of a typical Hammer experience. The need for good equipment and the right equipment is crucial for getting through the trails successfully. Of course, throw in some experienced driving for good measure and that would help too. But, as with most competitive sports, the need for the right rubber on the ground is crucial for the best performance out of your rig. Pro-Line is proud to announce the Hammer tire for all those brutal trails around the country for your 2.2” Crawler.
Part # PRO1145-11 M2 Compound

$18.29

$19.19

$20.19

Pro-Line is proud to announce the Flat Iron tire in 1.9” and in Pro-Line’s proprietary all-new compound called G8. It’s especially formulated to give your rig the ultimate in crawling capability on any surface you throw at it. “I actually made lines that I could never make with other tires,” says Brandon Coonce, NorCal crawler extraordinaire, while testing the new G8 compound in the 2.2” Hammer tire. He continues by saying “I’m able to make the same climbs with less momentum. This makes my rig much more predictable.”
Part # PRO1146-01 M2 Compound

$17.49

$19.19

The Pro-Line Eight Shooter wheel is the narrowest 2.2” wheel on the market. At only 1.2” wide, it allows the tire to do its job more effectively by giving it extreme flexibility. Because of it’s popular 2.2” diameter, you can outfit your crawler with over 24 different tires from Pro-Line. For you true crawler enthusiasts, you will also appreciate the 1.8” inner diameter. This allows for weight additions to be made easier as the beads create a channel to capture the weight. And because the inner diameter is just 1.8”, weight additions to the wheel are more closely centered to the axles making weight transfer less noticeable during acceleration, braking, and reversing.
Part # PRO2698-02 Silver

$26.99

$26.99

Pro-Line Masher 2000 One of the most versatile tires in Pro-Line history. The Masher 2000 is ideal for converting your back yard basher into the ultimate rock crawling monster. It’s multi-surface tread design shines on backyard type surfaces, grips like no other tire on rocks, and transitions smoothly to the streets of the neighborhood. The ultimate in traction and grip for a rock crawling combination that is second to none! Fits 2.2 rims.
M2 compound - Part # PRO1074-00 Pair

$17.49

$17.49

$39.19

Losi - Fr/R Comp Claws 2.2 Tires with Foam, Blue (2)Features

• Comp Claws offer enhanced traction through a multi-edge tread pattern that grips in multiple planes on uneven surfaces
• A Gription finish offers increased traction over the entire surface of the tire
• Internal sidewall ribbing adds stability for “side hilling”, while allowing the tire to flex and form over the rocks
• A stabilizing, external sidewall ring provides consistent “side hilling” traction at multiple angles
• The 5.2” outside diameter provides increased ground clearance
• Comp Claws will fit on any 2.2 crawler wheel
• Memory foam inserts are included for ultimate performance.
  Part # LOSA7681B

$19.99

$19.99

$12.19

• allows for ½ inch of additional clearance over standard 2.2” truck tires
• multi-edged tread design enhances traction by simultaneously gripping in multiple planes on uneven surfaces
• large lug design helps for self-cleaning removing mud and dirt giving enhanced traction
• comes in Losi’s sticky “B” (Blue) compound and will fit any common 2.2” rim making it useful for both stadium type trucks and highly modified rock crawlers Part # LOSA682B Pair

$17.39

Height:           5.5”
Width:            2.8”
ID:                 2.2"

Includes: Two Tires and Two Foam Inserts

Fits: 2.2 Rims Part # IMX7569

$17.49

$19.19

$24.39

$24.39

$24.39

$24.39

RPM - Chrome Clawz Rock Crawler Wheels - Narrow WheelbaseAt RPM, we found the perfect blend of design, material, and weight to bring you the best looking, strongest crawler wheels available that are guaranteed not to break! RPM wheels are made from our killer blend of nylons and are available in a molded black finish and a high luster chrome finish. On RPM chrome versions, the tire bonding areas are prestripped of the chrome to ensure proper bonding of the tire to the wheel. We also strip the finish out of the hex drive area as well to assure precise hex-to-wheel fits! The flow through design of our wheels means no more dirt build up on the inside (or outside) of the wheels which helps maintain tire balance and keeps unsprung weight to a minimum. Part # RPM82203

$8.69

$6.99

$8.69

$6.99

This LED light unit can be used to light up as many as16 individual LED lights. Perfect for adding LED lights to your R/C models, improving realism and amazing your friends. Unit comes with 2 red and 2 white colored LED lights.
Part # TAM53909

$50.49

Rock crawlers can now use the all new Axial AX10 Scorpion transmission in future builds or to update existing trucks they already have.� The AX10 Scorpion transmission was designed to keep the center of gravity as low as possible while still allowing a wide range of gearing choices.� The transmission come fully locked with no differential action and features ball bearings throughout as well as hard anodized output shafts.

Features

• Low center of gravity
• Fully locked with no differential action
• Full ball bearings Part # AXI30487

$43.59

Builders can now use the all new Axial AX10 Scorpion axle in future builds or to update existing trucks they already have. The AX10 Scorpion axle has been designed with many features that are not available from other choices on the market. Everything from the axle strength, pinion angle, caster, and ground clearance were taken into consideration, the result is a stronger better axle that will last. An aluminum diff locker is included along with hardened drive shafts and axles.

Features

• Strong composite plastic housing
• Hardened axles and drive shafts
• Class leading steering throw
• Designed for maximum ground clearance
• Aluminum Locker included
• Includes servo plate
• Requires additional parts for steering and servo mounting
  Part # AXI30488
  

$47.89

$8.79

$20.89

Proline Scale Tool Kit # 2 - Part # PRO6045-00

$17.49

FEATURES: Aluminum and steel construction, silver in color Fully assembled

INCLUDES: Complete Crawler Alloy Axle with Spool

REQUIRES: Installation Part # INT C22758SILVER

$189.99

$75.69

$28.19

$6.89

$2.49

$5.59

$2.89

$5.89

$5.79

$4.39

$2.59

$3.89

$4.49

$39.99

$5.59

$16.99

$34.99

$15.39

$19.99

Thunder Tech - Bumper & Servo Mount Combokit - includes one ALU-CB02X and one ALU-CB03X - BLACK

Part # TTHALU-CB04X (Black)

$38.99

Part # TTHALU-CB06X (Black)

$57.99

$27.99

$42.99

$42.99

$42.99

Thunder Tech - TLT-1 Wheel Wideners: (now available) (1 3/16") (30mm). Works on many other vehicles that use 12mm hex mounts.

Part # TTHDEL-TLT01

$42.99

Benefits: Stronger than stock axles (8mm outer axle), Sharper turning potential, 1/4" wider per side than stock, More efficient transfer of power.

Kit Includes:1 complete pair of CVD axles, 2 outer drive hexes (molded), Four 8x12mm ball bearings, 2  wheel bolts (16mm x 5mm), 2 drive pins, 2 rubber o-rings (for drive pin retention), Two 5mm E-clip rings, Two 6mm shim washers, 1 center gear pin (3.5 x 20mm), installation instructions.
Part # TTHMIP-CB01X

$42.99